7-12 85330A Multiple Channel Controller
Remote Programming Command Reference
Standard Command Reference
RUNTime:SWITch:DELay
Used for the delay between asserting the switch address list entry of the
RUNT:SWIT:SCAN command and the issuance of a receiver trigger. The
input to the command is in microseconds.
Default The default is 2 microseconds.
Syntax RUNT:SWIT:DEL <microseconds>;
Example RUNT:SWIT:DEL 50; ! Set the trigger or setting
! time to 50 micro-seconds.
NOTE • When using the multiple-parameter display mode of the 8530A, the
minimum switch settling time setting is 50
µs. Using faster settling times
can cause problems during the measurement.
• For the Fast Data Acquisition modes, 2 µs settling time is recommended.