Agilent Technologies 85330A Network Card User Manual


 
5-2 85330A Multiple Channel Controller
Manual Operation
To Use the Front Panel
To Use the Front Panel
This is an overview of main front panel features. For more information, refer
to “Using the Front Panel” in Chapter 2 of the Agilent 75000 Series B
Mainframes Agilent E1300A and E1301A/B User’s Manual
The front panel contains:
A 2-line by 40 character display
A QWERTY keyboard, plus utility keys mentioned below
Five software-controlled display softkeys
About the Softkeys
Menus
The 85330A’s softkey menus behave differently than those in a network
analyzer or microwave receiver. Each of the top-level menu items
{SYSTEM}
{85330A}
and {IBASIC} (IBASIC is present only if the IBASIC option is
installed) are treated as if they were independent instrument personalities.
When you leave a certain menu and return to it later, you start at the exact
point you left off.
For example:
1. Press
[Select Instr] {85330A} and press {CLOSE}.
2. Now leave the 85330A menu by pressing
[Select Instr] {SYSTEM}.
3. Return to the 85330A menu by pressing [Select Instr] {85330A}. Notice that
the CLOSE function reappears, not the top level of the 85330A menu.
Utility Keys [Select Instr]
This presents the two different instrument personalities, SYSTEM and
85330A. When you select an instrument, you are assigning the keyboard and
display to that instrument. This means that any menu operations, commands
executed or recalled, error displayed, for example. pertain only to that
instrument. Front panel operation of an instrument is independent from other
instruments and independent of the remote operation of the instrument.
[Prev Menu]
This key presents the previous softkey menu.
[More]
When there are more than five menu choices, an arrow appears on the right
side of the display. Press
[More] to display the next group of choices. This key
also displays the next 40 characters in a long display message.