Agilent Technologies 8722ET Network Card User Manual


 
Chapter 1 1-19
Installing Your Analyzer
STEP 4. Configure the Analyzer
To Attach Cabinet Flanges with Front Handles to the Analyzer
(Option 1CP)
1. Ensure that the cabinet flange kit with
handles is complete.
2. Remove the side trim strips.
(2) cabinet mount flanges
(2) front handles
(6) screws
3. Attach the cabinet mount flanges and the
handles to the sides of the front panel,
using three screws per side. (Attach the
flanges to the outside of the handles.)
4. Remove the feet and the tilt stands before
cabinet mounting the instrument.
WARNING If an instrument handle is
damaged, you should
replace it immediately.
Damaged handles can break
while you are moving or
lifting the instrument and
cause personal injury or
damage to the instrument.