Filter
Top Products
Chapter 1 1-25
Installing Your Analyzer
STEP 5. Verify the Analyzer Operation
To Test the Reflection Mode
1. Connect the equipment as shown and
press .
2. Look at the measurement trace displayed
on the analyzer. It should be similar to
the trace below.
3. ES models only: To check the reverse
reflection mode for channel 1, press
.
The measurement trace should be similar
to the trace shown below.
4. If you are ready to start making
measurements, continue with Chapter 2 ,
“Quick Start: Learning How to Make
Measurements.”
Preset
Meas
Refl: REV S22 (B/R)