Filter
Top Products
System Information C
Agilent E6474A User’s Guide 161
Power 9 to 34 V DC, 10W
Transformer AC Power (supplied with
receiver)
100 - 240 Volts AC 50 - 60 Hz
Support for Pulse triggering measurements
Internal GPS GPS Receiver 8 Channel internal GPS receiver
Connector type SMA
Differential compatible without dead reckoning
Note: The internal GPS can be disabled if you wish to connect an external GPS system.
* It is recommended the input signal level not exceed – 40 dBm.
† Adjacent channel desensitization applies to wideband mode (5 MHz IF filter) and is defined as: 1 dB compression of tuned
signal with interfering signal 5 MHz from tuned signal.
‡ Adjacent channel rejection applies to the narrowband mode (1.25 MHz IF filter) and is defined as: Suppression of interfering
signal ± 1.25 MHz from tuned signal.
Item Description Specification