Filter
Top Products
Installing the Software 2
Agilent E6474A User’s Guide 17
Install the E6474A software.
Follow these steps.
Once the installation has completed you are returned to the
installation dialog box.
Do This Notes
1 Insert the Agilent E6474A CD. This CD contains the required
software device drivers.
2 Your system may have autostart or go to
the Start button, click Run and type D:\
setup (where D is your CD drive).
The installation dialog box
appears (see below).
3 Select View and read the E6474A Release
Notes before installing.
These notes provide additional
information that may not be
covered in this guide.
4 Select Install next to the E6474A Wireless
Network Measurement Software option.
Before selecting this option you
can find out more by clicking the
information button.
5 Follow the installation instructions Select the Custom Install option
if you wish to install sample
default plan and demo files.
Select this option