Agilent Technologies Agilent E6474A Network Card User Manual


 
26 Agilent E6474A User’s Guide
3 Set Up Your System
E6473B High Speed Direct Connect Hub
The E6473B High Speed Direct Connect Hub expands the serial
communication capabilities of your computer. The computer
and hub communicate via the Universal Serial Bus (USB). The
hub converts the USB to six serial (COM) ports, which are in
turn connected to the devices.
Up to two phones and two Agilent digital receivers can be
connected to the hub. It also provides power to all devices,
phone battery charging, phone audio monitoring, and a serial
port for a GPS receiver or GPS/DR navigator.
In this section you can find:
To do this Refer to
How to connect your E6473B hub. page 27
How to power your E6473B hub. page 28
How to connect a License key dongle. page 31
How to connect other devices to the E6473B hub. page 31
How to connect two E6473B hubs together page 32
Verifying E6473B hub installation page 32
NOTE
Windows 2000 and XP
Window 2000 and Window XP requires that anyone installing hardware
drivers must have System Administrator rights. If you do not have System
Administrator rights for the computer on which the E6473B drivers need to
be installed, contact your site’s IT Support for assistance.