Filter
Top Products
82 Agilent E6474A User’s Guide
4 Use Your System
Identify devices
To identify the devices, perform the following procedure (this
example uses a phone attached to COM port 1). All system
components should be connected and powered on.
1 Right-click on COM1 in the System Setup view. A popup
menu appears, as shown in Figure 41.
Figure 41 System setup view showing pop-up menu
2 Select the Refresh Port option.
3 Once the device is identified a message dialog box appears.
4 Click:
• Yes if you want to update the COM port.
• No if you do not want to update the COM port.
• Details>> to view the devices found on the COM port.
When the device has been identified it will be added to the
System Setup View tree. See Figure 42.
NOTE
If you are sure which device is connected to the selected port, you can
reduce refresh time by using the Manual Refresh option. A second menu
is displayed showing the devices you are currently licensed to use. You can
then select the device that is connected to the selected port.