Agilent Technologies Agilent E6474A Network Card User Manual


 
Use Your System 4
Agilent E6474A User’s Guide 87
File types and locations
The Agilent E6474A system generates and uses different files.
The following list describes these files in terms of their function
and location.
File type File
extension
Description
Plan File .spf Created when you save a project. You can
select any location for this file.
Environment File .sef Contains information about view settings in
the above plan file. This file is generated
automatically in the same location as the plan
file.
Object Control File .ocf Contains information about each view that
makes up the plan file you created in the
system setup view and in the E6474A
software. This file is generated automatically
in the same location as the plan file.
Data file .sd5 Contains the recorded measurement data.
This file can be stored in any location. It is
recommended that the data file is saved in
the same location as the plan file.
Export plan file .epf Contains the Export Wizard settings. Refer to
the online help for more information on using
the Export Wizard. This file can be stored in
any location. It is recommended this file is
saved in the same location as the plan file.
NOTE
If you need to transfer a project to another laptop, it is recommended that
you copy the plan (.spf), environment (.sef), and object control files (.ocf)
at the new laptop.