Agilent Technologies N2610A Network Card User Manual


 
Fiber Testing 4
Setting Up an Autotest
Agilent FrameScope 350 User’s Manual 113
Entering the Operator Names
The names of the technicians performing the tests can be
entered, and will appear on the test report.
To enter the test technicians’ names:
1 On the Fiber Autotest Setup screen, press Operators, then Edit. The
Operator Setup screen displays.
2 Choose the FrameScope unit’s testing location, either Telecom
Room, Outlet, or Other.
3 Press the FrameScope Operator field. The onscreen keyboard
opens, with “FrameScope Operator” at the top or a list of previously
entered names will appear with the keyboard and keypad buttons
available.
4 Press the keyboard keys to enter the name of the technician using the
FrameScope, then press OK. The keyboard closes, and the
technician’s name appears in the FrameScope Operator field of the
Operator Setup screen.
5 Choose the DualRemote unit’s testing location, either Telecom
Room, Outlet, or Other.
6 Press the DualRemote Operator field. The onscreen keyboard
opens, with “DualRemote Operator” at the top or a list of previously
entered names will appear with the keyboard and keypad buttons
available.
7 Press the keyboard keys to enter the name of the technician using the
DualRemote, then press OK. The keyboard closes, and the
technician’s name appears in the DualRemote Operator field of the
Operator Setup screen.
8 Press OK and press Main Menu. The Fiber Main Menu displays.