Agilent Technologies N2610A Network Card User Manual


 
Cable Testing in Expert Mode 5
The Expert Autotest Setup
Agilent FrameScope 350 User’s Manual 127
Choosing the Labeling Format
The labeling format for Expert Mode is the same as that
previously described in Chapter 3, “Cable Testing with the
FrameScope 350”. See “Choosing the Labeling Format” on
page 64 for more information.
Choosing the Cable Type
Cable from different manufacturers has different transmission
characteristics. The FrameScope 350 compensates for those
differences if you tell it what cable is used on the job. A grey
cable spool icon indicates UTP cabling, a black cable spool icon
indicates shielded cabling.
1 On the Autotest Setup screen, press the cable spool icon, then press
Edit. The Cable Setup screen displays.
2 Select the cable manufacturer, and press Next. The Cable Database
screen displays.
3
Select a cable on the list, and press OK. The Autotest Setup
screen displays, with the selected cable type next to the cable
spool icon. If the cable is not in the cable database, see
“Adding a new cable type” on page 72.