Filter
Top Products
180 Agilent FrameScope 350 User’s Manual
8 Network Performance Analyzer Reference
Network Connection
• Test the Default Gateway and the DNS and WINS servers. If
any of these devices is not working, an error is recorded in
the Error Log. The Default Gateway is tested by ARPing for
its MAC address. The DNS and WINS servers are tested by
looking up the FrameScope 350’s host name.
When all of this has finished, the FrameScope 350 is ready to
monitor the network and perform network testing.
NOTE
If the operator directly connects the FrameScope 350 to the
DualRemote 350 using just a cable (no hubs or other network
devices), the FrameScope 350 detects this condition and
switches to cable test mode.