Filter
Top Products
Network Testing with the FrameScope 350 2
Generating Network Traffic
Agilent FrameScope 350 User’s Manual 41
3
On the Parameters tab, configure the traffic characteristics
as you desire. Press each parameter (Frame Length, Frame
Rate, and so on) and enter the value you want in the
on-screen keypad. See “Traffic Generation” on page 206.
4 To inject errors in the generated traffic, press the check box
for the type of error you want (CRC, short frame, or long
frame). See “Traffic Generation” on page 206.
5 To configure the frame characteristics of the traffic, press
the Frame tab.