Filter
Top Products
60 Agilent FrameScope 350 User’s Manual
3 Cable Testing with the FrameScope 350
Cable Testing Overview
3 Switch on the FrameScope and DualRemote testers and
connect them to the cabling to be tested. See “Connecting to
the Network” on page 12.
4 Press the Cable tab on the FrameScope’s Main Menu screen
and then press a test button to begin the test.
You can run a preprogrammed autotest or configure your
own test parameter values before running the test.
• See “Choosing the Profile” on page 62.
• See “Opening the Setup Menu” on page 62.
5 View the results of the test and store test results as desired.
See “Saving Test Results” on page 79.