Filter
Top Products
Cable Testing with the FrameScope 350 3
Printing Labels
Agilent FrameScope 350 User’s Manual 91
3 Press Autoprint to enable the Autoprint function. A checkmark
shows that the function is enabled. Press OK
4 Connect the N2605A-050 interface cable to the serial ports of the
FrameScope 350 and Brady TLS2200.
5 Turn the Brady printer on.
6 Press the Func and Exit keys on the printer simultaneously. This
sets the printer to Peripheral mode.
Printing Labels from a PC
Refer to the ScopeData Pro User’s Guide for instructions on printing
labels using a PC.