Agilent Technologies N6314A Network Card User Manual


 
7 User’s Guide 5964-7333
Inspect the Mating Plane Surfaces
Flat contact between the connectors at all points on their mating plane surfaces is required for
a good connection. Look especially for deep scratches or dents, and for dirt and metal particles
on the connector mating plane surfaces. Also look for signs of damage due to excessive or
uneven wear or misalignment.
Light burnishing of the mating plane surfaces is normal, and is evident as light scratches or
shallow circular marks distributed more or less uniformly over the mating plane surface.
Other small defects and cosmetic imperfections are also normal. None of these affect electrical
or mechanical performance.
If a connector shows deep scratches or dents, particles clinging to the mating plane surfaces,
or uneven wear, clean and inspect it again. Cables with damaged connectors should be
repaired or discarded. Determine the cause of damage before connecting a new, undamaged
connector in the same configuration.