Filter
Top Products
7
MPEGscope Plus and MPEGscope Lite
3
If your MPEGscope has a Real-time Analyzer, disconnect
the ribbon cable from the Real-time Analyzer card. The
cable runs from the MPEGscope main card to the Real-
time Analyzer card.
4
If your optional line interface is connected to the
MPEGscope main card with a cable, disconnect the
cable from the optional interface card.
5
Remove the faceplate screw from slot 3
with the screwdriver provided, then
remove the optional line interface.
6
If your optional line interface is connected to the
MPEGscope main card with a cable, disconnect the other
end of the cable from the MPEGscope main card and
remove the cable.