Filter
Top Products
MPEGscope Plus and MPEGscope Lite
10
Step 4: Replace the cover
1
Ensure that the two latches on the front
sides of the cover are lifted up.
3
Lower the two latches on the front
sides of the cover into place.
4
Reconnect your mouse, keyboard,
display, power cables, and LAN
connection, then power on your
MPEGscope.
2
Slide the cover onto the computer, making sure
that the two guides at the bottom of the case slide
into the two rails at the base of the computer.
Firmly slide the cover backwards into position.