Filter
Top Products
Connecting to the SMPTE 310M interface
20
Connecting to the SMPTE 310M interface
DVB–SPI IN/OUT
SMPTE 310M
E6292A
IN
OUT
5
Connect the input line from
your system under test to
the IN port on the SMPTE
310M interface.
3
Connect the single SCSI
50-pin connector on the
DVB-SPI Y-Adapter cable
to the DVB-SPI IN/OUT
port on the SMPTE 310M
interface.
2
Connect the SCSI
26-pin male
connector labelled
SPI Rx on the DVB–
SPI Y–Adapter cable
to the DVB-SPI Rx
port on the
MPEGscope main
board
4
Connect the output line to
your system under test to
the OUT port on the
SMPTE 310 interface.
1
Connect the SCSI 26-pin
male connector labelled
SPI Tx on the DVB–SPI
Y–Adapter cable to the
DVB-SPI Tx port on the
MPEGscope main board.
To system under test...
DVB–SPI Tx DVB–SPI Rx
EXT CLK IN
DVB–SPI interface on
MPEGscope main board
SMPTE 310M interface