Filter
Top Products
25
After copying an image file in Windows Explorer, go to My Bluetooth Places >
View devices in range, right-click the destination device and select Paste.
Note: Battery-powered remote devices, such as a cell phones or cameras, may
require that Bluetooth be specifically enabled before they can accept an image;
see the battery-powered device’s documentation for more information.
2.7.3 Audio Gateway
The Audio Gateway application allows a remote Bluetooth device to use this
computer’s microphone and speakers as the remote device’s audio input and
output devices. For example, if your Bluetooth cellular phone supports audio
gateway service, you can redirect the phone’s conversation to your computer’s
speakerphone.
To connect to an Audio Gateway service enabled device:
1. Open My Bluetooth Places and discover the Audio Gateway service provided
by the remote Bluetooth device. Then double-click the service to make the
connection.
2. If required on the remote Bluetooth device, respond to the Bluetooth Service
Authorization message to allow the access.
Once the connection is established, remote device’s audio will be redirected to your
computer.