Filter
Top Products
39
If you want to enable Internet Connection Sharing (ICS) on Windows 98SE, ME,
you should run the Network Setup Wizard from the CD or floppy disk. As this
manual only describes a very typical connection method, actual connection method
varies according to your network environment and a computer’s operation system.
For more information please refer to Windows online help or your network
administrator.
Note: If a client is going to use the Network Access service provided by another
remote Bluetooth device, the client should either reboot or manually renew the ip
address.
2.7.11 Bluetooth Serial Port
The Bluetooth Serial Port application allows this computer to establish a wireless
serial connection with a remote Bluetooth device.
The applications on both this computer and the remote device must be configured
to send and receive data to and from the respective communications port (COM
port) assigned to the Bluetooth serial port. The wireless serial connection may then
be used by the applications as though a physical serial cable connected the
devices.
To establish a virtual serial port connection between this computer and another
Bluetooth device:
1. Open My Bluetooth Places and discover the Serial Port service on the
destination Bluetooth device.
2. Double-click the Serial Port shortcut to make the connection.
3. If secure option is enabled, the operator of the other Bluetooth device must be
available to respond to any authorization requests.
4. You will be prompted of the COM port name that is associated with the
connection. Now you can configure programs to use that port.