Filter
Top Products
Dynamic Link Aggregation Specifications Configuring Dynamic Link Aggregation
page 13-2 OmniSwitch 6600 Family Network Configuration Guide April 2006
Dynamic Link Aggregation Specifications
The table below lists specifications for dynamic aggregation groups and ports:
IEEE Specifications Supported 802.3ad — Aggregation of Multiple Link Segments
Maximum number of link aggregation groups per
stack (composed of up to eight OmniSwitch 6600
Family switches)
30
Maximum number of link aggregation groups per
OmniSwitch 6600-U24, 6600-U24, 6600-P24, or
6602-24 switch
4
Maximum number of link aggregation groups per
OmniSwitch 6648 or 6602-48 switch
8
Range for optional group name 1 to 255 characters
Number of links per group supported on a single
switch
2, 4, or 8
Number of links per group supported in a stack 2, 4, 8, or 16
Group actor admin key 0 to 65535
Group actor system priority 0 to 65535
Group partner system priority 0 to 65535
Group partner admin key 0 to 65535
Port actor admin key 0 to 65535
Port actor system priority 0 to 255
Port partner admin key 0 to 65535
Port partner admin system priority 0 to 255
Port actor port 0 to 65535
Port actor port priority 0 to 255
Port partner admin port 0 to 65535
Port partner admin port priority 0 to 255
CLI Command Prefix Recognition All dynamic link aggregation configuration com-
mands support prefix recognition. (Dynamic link
aggregation show commands do not support prefix
recognition.) See the “Using the CLI” chapter in the
OmniSwitch 6600 Family Switch Management Guide
for more information.