Filter
Top Products
Managing Source Learning Displaying MAC Address Table Information
OmniSwitch 6600 Family Network Configuration Guide April 2006 page 2-9
Displaying MAC Address Table Information
To display MAC Address Table entries, statistics, and aging time values, use the show commands listed
below:
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the show mac-address-table and show mac-address-table
aging-time commands is also given in “Sample MAC Address Table Configuration” on page 2-2.
show mac-address-table Displays a list of all MAC addresses known to the MAC address
table, including all static MAC addresses.
show mac-address-table static-
multicast
Displays a list of all static multicast MAC addresses known to the
MAC address table. Note that only static multicast addresses
assigned to ports that are up and enabled are displayed with this
command.
show mac-address-table count Displays a count of the different types of MAC addresses
(learned, permanent, reset, timeout, and static multicast). Also
includes a total count of all addresses known to the MAC address
table.
show mac-address-table aging-time Displays the current MAC address aging timer value by switch or
VLAN.