Filter
Top Products
Standards Compliance Regulatory Compliance and Safety Information
page A-2 OmniSwitch 6600 Series Hardware Users Guide April 2004
Standards Compliance
The product bears the CE mark. In addition it is in compliance with the following other safety and EMC
standards:
Safety Standards
• UL 60950
• CAN/CSA-C22.2 No. 60950-00
• EN 60950
• IEC 60950
• TS 001
• AS/NZS 3260
• CB Certification PBR IEC 950
EMC Standards
• FCC Part 15 (CFR 47) Class A/Class B
• ICES-003 Class A/Class B
• EN 55022 Class A/Class B
• CISPR 22 Class A/Class B
• AS/NZS 3548 Class A/Class B
• VCCI Class A/Class B
• EN 55024
• EN 50082-1
• EN 61000-3-2
• EN 61000-3-3
• EN 61000-4-2
• EN 61000-4-3
• EN 61000-4-4
• EN 61000-4-5
• EN 61000-4-6
• EN 61000-4-8
• ENC 1000-4-11
Safety and Environmental Standards
• ETS 300 019 Storage Class 1.1
• ETS 300 019 Transportation Class 2.3
• ETS 300 019 Stationary Use Class 3.1
All hardware switching modules used in an OmniSwitch 6600 Series switches comply with Class A and
Class B standards for digital devices per the FCC Part 15, ICES-003, EN 55022, CISPR 22, AS/NZS
3548, and VCCI standards. Modules with copper connectors meet Class A requirements using unshielded
(UTP) cables, but meet Class B requirements using shielded (STP) cables.