Filter
Top Products
www.aleratec.com
13
Using the DVD/CD Duplicator
Main Menu: USB Mode
The “USB mode” activates the connection from the DVD/CD RoboRacer
SA built in hard disk drive to a PC.
1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “USB
Mode” function.
2. Press ENTER ( ) and the system will ask you if you want to enter the
“USB mode”.
3. Press ENTER ( ) again to make the connection.
Allow the duplicator and the PC time to register the USB connection
before accessing the drives on the RoboRacer SA.
Once the USB connection is made, you must go back to the “USB
Mode” and press ESCAPE and then ENTER to leave the USB
connection and return to the “Stand Alone Mode”.
You cannot see the HDD, only the DVD/CD drive in “My Computer”
because the HDD is formatted with a special le format that can only
be read by the RoboRacer SA controller. Only the “Image Manager”
program, covered in the next pages, can send les to the HDD.
USB Mode
Enter USB Mode
Are you sure ?