Allied Telesis AR44xS series Switch User Manual


 
Features in 276-04 13
Version 276-05
C613-10474-00 REV D
CR00012624
VRRP,
IP Gateway
2 Under certain network conditions in which VRRP entities become temporarily
unsynchronised, the router or switch could receive a gratuitous ARP from a self-
elected VRRP master when the router or switch was still the master. This caused
the existing master to create an ARP entry that incorrectly redirected packets
towards the other VRRP entity even after the other entity had become a slave
again.
This issue has been resolved. The router or switch no longer accepts gratuitous
ARPs from other VRRP entities while it is still the Master.
Y - YYYYY- - -
CR00012657
STP 2 When STP was operating with a large number of VLANs in the same STP region,
the switch sometimes rebooted while processing topology change notifications
(TCNs).
This issue has been resolved.
- --YYYY- - -
CR00012674
IPv6 2 The router or switch sometimes rebooted when it was about to send an MLDv2
source specific query.
This issue has been resolved.
Y -YYY--- - -
CR00012679
IPv6, PIMv6 2 For IPv6, PIM sometimes failed to forward multicast packets when MLD snooping
was enabled and MLDv2 was used by multicast receivers/clients to report group
membership.
This issue has been resolved.
Y -YYY--- - -
CR00012681
IPv6, MLD 2 Valid MLDv2 listener reports that contained two or more source addresses were
sometimes rejected by the router or switch because it treated them as invalid
packets. This could cause multicast clients to unexpectedly stop receiving
multicasts.
This issue has been resolved.
Y -YYY--- - -
CR00012741
Core, File,
Stack
2 The command create config=filename set did not copy the configuration file
to all switches in the stack, but only saved the file onto the current switch.
This issue has been resolved.
- --YYYY- - -
CR Module Level Description
AR44xS/ AR450S
AR7x5
AR750S
Rapier i
AT-8800
AT-8600
AT-8700XL
AT-8948
AT-9900
AT-9800