Filter
Top Products
Features in 276-02 38
Version 276-05
C613-10474-00 REV D
CR00012140
PIM 2 If the link between two PIM Sparse Mode neighbours was removed, sometimes
one of the neighbours rebooted.
This issue has been resolved.
YYYYY- - YYY
CR00012167
Switch 2 When MAC address entries time out in the switch’s ARP table, the switch re-ARPs
for the entry’s MAC address and adds the entries back if it gets a reply. When
48-port switches re-added the entry, sometimes they associated it with the
wrong port number. This stopped the switch from transmitting traffic to that
MAC address.
This issue has been resolved.
---YYYY- - -
CR00012204
PPP, Eth,
IP Gateway,
VRRP
2 If VRRP and/or PPP interfaces underwent many state changes, slow memory leaks
occurred.
This issue has been resolved.
YYYYYYYYYY
CR00012232
CR00012430
Firewall,
SIP ALG
2 Some SIP phones may alter or periodically refresh the session information for a
call, by sending a re-invite message while the call is in progress. Previously, when
a call was established between two SIP phones on the private side of the firewall
and one of the phones attempted to update the session information, the call
became corrupted. This meant that one of the callers stopped hearing the other.
This issue has been resolved.
YYYYY----Y
CR00012233
BOOTP 2 When the router or switch acted as a relay agent to process BOOTP requests that
contained option 82, it modified the option 82 information of packets even
when their giaddr field was set to a non-zero value. The router or switch applied
the policy specified by the command:
set bootp relay option82 policy={drop|keep|replace}
This issue has been resolved. As required by RFC 3046, the router or switch now
forwards client DHCP packets that have a non-zero giaddr field without
modifying their option 82 fields.
YYYYYYYYYY
CR Module Level Description
AR44xS / AR450S
AR7x5
AR750S
Rapier i
AT-8800
AT-8600
AT-8700XL
AT-8948
AT-9900
AT-9800