Filter
Top Products
Features in 276-02 45
Version 276-05
C613-10474-00 REV D
CR00011888
Switch 3 When a trunk group on a 48-port switch spanned multiple switch instances, the
switch sometimes did not transmit traffic. The ports in each instance are:
Models First instance Second instance
Rapier 48i, AT-8748XL, AT-8648T/2SP 1-24, 49 25-48, 50
AT-8848 1-24, 50 25-48, 49
This issue has been resolved.
---YYYY- - -
CR00011931
VLAN 3 After users added multiple ports to one private VLAN as tagged ports, those ports
could not be added to another private VLAN as tagged ports by using a single
command (they could be added one port at a time).
This issue has been resolved.
---YYYYYY-
CR00011943
IP Gateway 3 Previously, it was possible to modify settings for the default local IP interface
when it had no IP address. However, these settings were invalid so the router or
switch did not save them.
This issue has been resolved. Settings for the default local IP interface now cannot
be changed unless the interface has an IP address assigned to it.
YYYYYYYYYY
CR00011969
OSPF 3 When a user changed the asexternal setting for OSPF, sometimes OSPF did not
correctly update the LSA database.
This issue has been resolved.
YYYYYYYYYY
CR00012014
Switch 3 Setting a port’s speed to a fixed speed (such as 100mfull) should also disable
automdi on the port. Previously, if the switch set the port speed to a fixed speed
during start-up before the switch had fully initialised, auto MDI was not disabled.
This issue has been resolved.
-------YY-
CR Module Level Description
AR44xS / AR450S
AR7x5
AR750S
Rapier i
AT-8800
AT-8600
AT-8700XL
AT-8948
AT-9900
AT-9800