Filter
Top Products
Features in 276-02 52
Version 276-05
C613-10474-00 REV D
CR00011204
IP Gateway - This Software Version allows you to add ARP entries with multicast MAC
addresses and allows the router or switch to accept packets with conflicting IP
and MAC addresses. It introduces the enable ip macdisparity and disable ip
macdisparity commands to support this. For more information, see “Adding
Static ARP Entries with Multicast MAC Addresses (CR00011204)” on page 67.
YYYYYYYYYY
CR00011271
Switch,
Utility
- A new switch filter feature enables you to use a switch filter to make a VLAN
secure without preventing access to other VLANs. For more information, see
“Securing a Single VLAN through Switch Filters (CR00011271)” on page 69.
---YYYY- - -
CR00011565
ASYN - When an asynchronous port is in ten mode, it bundles together the characters
that it receives within a certain time period, instead of passing them one at a time
to a higher protocol layer for processing. The time period over which characters
are bundled is called the ten timer. This enhancement enables you to reduce the
length of the ten timer, to improve response times for remote terminal sessions.
For more information, see “Making Asynchronous Ports Respond More Quickly
(CR00011565)” on page 71.
YYYYYYYYYY
CR00011615
Switch - When a switch port has been given a description, it is now possible to use an
SNMP application to see the port description, through the Interfaces group of the
MIB-II MIB ifDescr OID.
Y- YYYYYYYY
CR00011724
BGP - You can now display:
■ the number of routes learned from a specific peer, by using the existing
command show bgp peer=ip-address
■ information about each route learned from a specific peer, by using the new
peer parameter in the command show bgp route peer=ip-address
For more information see “Displaying Routes Learned from a Specific BGP Peer
(CR00011724)” on page 73.
YYYYY- - YYY
CR Module Level Description
AR44xS / AR450S
AR7x5
AR750S
Rapier i
AT-8800
AT-8600
AT-8700XL
AT-8948
AT-9900
AT-9800