Filter
Top Products
Features in 276-01 59
Version 276-05
C613-10474-00 REV D
CR00011324
SSL 2 A reboot could occur when the SSLv2 client received a hello message that had an
incorrect challenge length.
This issue has been resolved, so that the SSL server’s resistance to denial of service
attacks has been improved.
YY
YYYYYYYY
CR00011328
PIM 2 When the switch was using PIM to route multicast traffic, it sometimes rebooted
if the command show switch table=nh was entered.
This issue has been resolved.
--
-----YY-
CR00011337
Environment
Monitoring
2 The switch did not record the system temperature, and therefore output of the
command show system displayed the temperature as 0°C.
This issue has been resolved.
--
-------Y
CR00011345
MIB 2 The ATR enterprise MIB includes objects for managing ping operations. These
objects within the MIB are now fully supported.
Minor modifications have also been made to the MIB. Download the latest
atrrouter.mib file from ftp.alliedtelesis.co.nz/pub/ar-mib/atrouter.zip.
YY
YYYYYYYY
CR00011387
PPP 2 Using an online limit for a PPP interface over PPPoE over a VLAN caused the router
or switch to reboot when the online limit was reached.
This issue has been resolved.
YY
YYY- -YYY
CR00011402
SSL 2 Previously, if an SSL client closed the TCP connection before the SSL handshake
was complete then the SSL server was not forwarding the notification onto HTTP.
The TCP session was left in the close wait state and HTTP, SSL and TCP sessions
did not time out.
This issue has been resolved.
YY
YYYYYYYY
CR00011473
ISAKMP 2 Configuring an ISAKMP policy with a 24-character name sometimes caused the
router or switch to reboot. Also, it was possible to enter over-length names into
the isakmppolicy parameter of the command set ipsec policy.
Both issues have been resolved.
YY
YYY-----
CR Module Level Description
AR44xS / AR450S
AR7x5
AR750S
Rapier i
AT-8800
AT-8600
AT-8700XL
AT-8948
AT-9900
AT-9800