Filter
Top Products
Permanent Assignments (CR00011355) 81
Version 276-05
C613-10474-00 REV D
reset perm
Syntax
RESET PERM=perm-name
where perm-name is the name of the permanent assignment. The name is case sensitive and must be identical on each router in the permanent assignment. If the
name contains spaces, it must be in double quotes.
Description
This command resets a named permanent assignment. The port being used by the permanent assignment is reset and the TCP connection being used for the
permanent assignment is reset. A new TCP connection is established for the permanent assignment.
Examples
To reset the permanent assignment called DataLogger, use the command:
reset perm=datalogger
Related Commands
add perm
delete perm
set perm
show perm