Allied Telesis AT-8000GS/POE Switch User Manual


 
AT-8000GS Series Gigabit Ethernet Switch Installation Guide
19
Figure 9 below illustrates the mode LEDs on the front panel and Table 5
below gives the functional description of each LED.
Figure 9 Front Panel Mode Selection LEDs
Note
Please refer to Table 6, “Port LED Mode/Indications for AT-8000GS/
24 & AT-8000GS/48” on page 20 for the corresponding Port LED
Mode functions.
RJ-45 Port LEDs
on AT-8000GS/24
& AT-8000GS/48
Figure 10 on page 20 illustrates the RJ-45 port LEDs for the AT-8000GS/
24 Gigabit Ethernet Switch and AT-8000GS/48 Gigabit Ethernet Switch.
Note
Please refer to Table 5, “Mode LED Indication (Non POE Only)” on
page 19 for the selection of the Mode using the front panel MODE
switch
Table 5 Mode LED Indication (Non POE Only)
LED Description LED Indication Functional Description
COL
Green Indicates that Collision status
is displayed on right port LED.
Off Another Mode is displayed.
SPD
Green Indicates that Speed status is
displayed on right port LED.
Off Another Mode is displayed.
FDX
Green Indicates that Duplex status is
displayed on right port LED.
Off Another Mode is displayed.
ACT
Blinking Green Indicates that Activity status is
displayed on right port LED.
Off Another Mode is displayed.