Allied Telesis AT -8000S/48 Switch User Manual

Allied Telesis
Datasheet | Switches
Layer 2 Stackable Fast Ethernet Switch
48 port stackable 10/100TX Layer 2 switch
with 2 active SFP bays (unpopulated) and
2 standby 10/100/1000T ports (RJ-45)
One of a series of stackable switches from
Allied Telesis, the AT-8000S/48 provides high
performance Layer 2 switching in an affordable
fixed configuration platform. This switch offers
48 10/100 ports, two fixed 1Gbps SFP slots
plus two integrated stacking connectors that
deliver a total of 4Gbps stacking bandwidth. The
stacking capability integrated into this platform
is configured as a resilient ring topology
designed to provide high reliability and
simplified management for higher port density
Ideal Branch Office and Wiring
Closet Connectivity
Powerful line rate performance and stackability
make this switch ideal for branch offices or the
wiring closet of larger offices. The state-of-the-
art QoS capability of this product ensures
reliable delivery of advanced network services
such as voice while effectively controlling the
continually increasing traffic needs found in
today’s networks.
Easy Access Networking
Featuring an industry standard CLI and Allied
Telesis’ intuitive yet fully featured Web interface
the advanced features of the AT-8000S/48 are
accessible to a wide range of system
administrators. The well known CLI and Web
interfaces significantly reduce learning time and
minimize the cost of deployment.
Secure Management
Only authorized administrators can access the
management interface of the 8000S series.
Protocols such as SSL, SSH and SNMPv3
facilitate this protection of your network with
local or remote connections.
Securing the Network Edge
To ensure the protection of your data, it is
important to control access to your network.
Protocols such as IEEE 802.1x port-based
authentication guarantee that only known users
are connected to the network. Unknown users
who physically connect can be isolated to a
pre-determined part of your network offering
guests such benefits as Internet access while
ensuring the integrity of your private network
Gigabit and Fast Ethernet SFP
All switches in the 8000S family support both
Gigabit and Fast Ethernet Small Form-factor
Pluggables (SFPs). This makes the 8000S series
an ideal family for environments where Gigabit
fiber switches will be phased in over time. The
8000S family allows for connectivity to the
legacy 100FX hardware until it is upgraded to
Gigabit. Support for both speeds of SFPs allows
organizations to stay within budget as they
migrate to faster technologies.
Key Features
Easy, Well Known Management
Industry standard CLI
Simple intuitive, full featured Allied Telesis
Web Interface
Secure encrypted Web and CLI management
with SSHv2 and SSL
Two level access privileges
Affordable Truly Stackable 10/100
Switching Platform
Single IP address stack management
4Gig resilient ring stacking architecture
Across stack link aggregation
Across stack VLAN configuration
Across stack port mirroring
Redundant standby stack master
All the QoS Needed in the Wiring Closet
for Today’s Voice and Data Networking
Eight priorities assigned to four queues
IEEE 802.1p for Layer 2 QoS
DSCP (DiffServ) for Layer 3 QoS
IEEE 802.1p to DSCP remarking traffic ready for
transport to the Layer 3 core of the network
Layer 2 and Layer 3 ACL
Securing the Network at its Most
Vulnerable Point
IEEE 802.1x and RADIUS network login: for
advanced control of user authentication and
Guest VLAN: to ensure visitors or unauthorized
users connect only to services defined by IT e.g.
TACACS+: for ease of management security
Layer 2 and Layer 3 ACL
Port MAC address security options
Power Supply Efficiency