Allied Telesis 16fi Switch User Manual


  Open as PDF
of 6
 
Allied Telesis www.alliedtelesis.com
RAPIER 'i' SERIES | WAN Capable Layer 3 Fast Ethernet Switches
Ordering Information
AT-RP16fi/SC-xx
100FX (SC) 16 port managed Layer 3 switch, with 2
expansion bays and a WAN access bay
Order information: 990-001109-xx (RoHS Compliant)
AT-RP16fiMT-xx
100FX (MT) 16 port managed Layer 3 switch, with 2
expansion bays and a WAN access bay
Order information: 990-11937-xx (Not RoHS compliant)
AT-RP24i-xx
10/100TX 24 port managed Layer 3 switch, with RJ-45
connectors, 2 expansion bays and a WAN access bay
Order information: 990-001317-xx (RoHS Compliant)
AT-RP48i-xx
10/100TX 48 port managed Layer 3 switch, with RJ-45
connectors and 2 expansion bays
Order information: 990-11935-xx (Not RoHS compliant)
Where xx = 10 for U.S. power cord
20 for no power cord
30 for U.K. power cord
40 for Australia power cord
50 for Europe power cord
80 for -48v DC power supply
WAN Access Options
Port Interface Card (PIC) Options
AT-AR020
Single software configurable E1/T1 interface that
supports channelized /unchannelized Primary Rate
ISDN /Frame Relay
2
Order Number: 990-001304-00
AT-AR021S (V3)
6
Single basic rate ISDN S/T interface
Order Number: 990-002153-00
AT-AR023
Single synchronous port up to 2Mbps to an external
CSU/DSU (AT-V.35-DTE-00 or AT-X.21-DTE-00 cable
required)
Order number: 990-001104-00
AT-AR024
Four asynchronous RS-232 interfaces to 115Kbps
Order number: 990-001105-00
AT-AR027
Two VoIP FXS ports
Order number: 990-001356-00
Network Service Modules
4
AT-AR040 Network Service Module
2
4 PIC slots
Order number: 990-001299-00
AT-AR041 Network Service Module
8 BRI ISDN (S/T) ports
Order number: 990-001300-00
AT-AR042 Network Service Module
4 BRI ISDN (S/T) ports
Order number: 990-001303-00
Encryption/Compression Module
4
(for use with Rapier 16fi and Rapier 24i only)
AT-AR061
EPAC encryption/compression card
Order number: 990-11933-00
4
Uplink Modules
4
AT-A35SX/SC
1 x 1000SX (SC) Gigabit fiber
Order information: 990-001086-00
AT-A35LX/SC
1 x 1000LX (SC) Gigabit fiber
Order information: 990-001091-00
AT-A39/T
1 x 10/100/1000T (RJ-45) Gigabit copper
Order information: 990-11345-00
AT-A40/SC
1 x 100FX (SC) multimode fiber
Order information: 990-11920-00
AT-A40/MT
1 x 100FX (MT) multimode fiber
Order information: 990-11921-00
AT-A41/SC
1 x 100FX (SC) singlemode fiber
Order information: 990-11922-00
AT-A41/MT
1 x 100FX (MT) singlemode fiber
Order information: 990-11923-00
AT-A42
1 x Unpopulated GBIC module
Order information: 990-001092-00
GBIC Modules
3 / 4
(for use with AT-A42)
AT-G8T
1000T GBIC Copper
AT-G8SX-01
500m SX GBIC, based on 50 micron MMF
220m SX GBIC, based on 62.5 micron MMF
AT-G8LX10
10km LX GBIC, based on 9 micron SMF
AT-G8LX25
25km LX GBIC, based on 9 micron SMF
AT-G8LX40
40km LX GBIC, based on 9 micron SMF
AT-G8LX70
70km LX GBIC, based on 9 micron SMF
Software Upgrade Options
AT-AR-RPFL3UPGRD
Rapier Full Layer 3 Upgrade
• IPX routing
• RSVP
• PIM DM
• PIM SM
• DVMRP
Order number: 980-10002-y
AT-RPADVL3UPGRD
Rapier Series Advanced Layer 3 Upgrade
• IPv6
• BGP4
• Load balancing
5
Order number: 980-10024-y
AT-RPSecPK-00
Rapier Security Pack Upgrade
• Firewall SMTP
• Proxy
• HTTP Proxy
Order number: 980-10030-y
AT-AR-3DES
3DES Encryption option (requires AR061)
Order number: 980-10000-y
Where y = 00 for 1 shot
01 for 1 licence
05 for 5 licences
10 for 10 licences
25 for 25 licences
50 for 50 licences
100 for 100 licences
250 for 250 licences
2
Only two AT-AR020 allowed in AT-AR040
3
Please check for availability
4
RoHS compliance on AT Modules, please check with
your sales representative
5
Load balancer requires Release 2.5.1 or later. and
AT-RPSecPK
6
AR021S (V3) requires AlliedWare
®
Operating System
version 2.9.1-13 or later
 previous