American Power Conversion Automatic Disconnect Switch Switch User Manual


 
4 Broadband Automatic Disconnect Switch User Manual
Installation
Electrical Specifications
Physical Specifications
Installation
Unpack
Read the Safety Guide before installing this unit. The User Manual and Safety Guide are accessible on the
APC Web site, www.apc.com.
Inspect the unit upon receipt. Notify the carrier and dealer if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
Check the package contents:
Utility Power Cable
Input
Connection
Three Position
Terminal Block
Cable Adapter (5/8-24)
Terminal Block to Coax Center Conductor
Nominal Voltage
220 V 63 V
Allowable Input range
165-270 V 40-75 V
Maximum Current
15 A 18 A
Input Current Limiting
10 A N/A
Output
Connection
Three Position
Terminal Block
Cable Adapter (5/8-24)
Terminal Block to Coax Center Conductor I
Allowable Output range
40-75 V
Initial Connection Delay
Primary - None
Secondary - 5.5 seconds
Time to connect attached FRP
to cable system after output
failure
N/A 350 mS maximum
Characteristic Specification
Height/Width/Depth
15” x 7” x 8” (38.1 x 17.8 x 20.3 cm)
Weight
14 lbs (6.4 kg)