Filter
Top Products
User’s Guide
Escape Sequence Quick Reference G-3
Epson FX (Cont’d)
ASCII
Command
Epson FX
Command Description
ESC @ Resets printer.
ESC A Set line spacing to n/72 inch.
ESC B Set vertical tabs.
ESC C Set forms length in lines.
ESC C Set forms length in inches when first variable is a null.
ESC D Set horizontal tab.
ESC E Select emphasized printing.
ESC F Cancel emphasized printing.
ESC G Select double-strike printing.
ESC H Cancel double-strike printing.
ESC I Enable/disable printing of characters stored in the lower control
code area (00hex to 31 hex).
ESC J Perform an immediate line feed of n/216 inch.
ESC K Select single-density graphics.
ESC L Select double-density graphics.
ESC M Select Elite (12 cpi) mode.
ESC N Set perforation skip to n lines.
ESC O Disable perforation skip mode.
ESC P Select Pica (10 cpi) mode.
ESC Q Set right margin.
ESC R Select international character set.
ESC S Select Superscript or Subscript characters.