Filter
Top Products
User’s Guide
Features and Profiles 4-9
9. Repeat Steps 5 through 8 as necessary until all features are correctly set for your
application.
10. Close the Keypad Door to exit Setup Mode. The alternating display will read:
To answer “Yes”, press the Profile key. This will permanently record the change in
non-volatile memory for that profile.
To answer “No”, press any other key. This will make the change temporary, thus not
changing the original profile setting. These settings will be valid until profiles are
changed again or the printer is powered off.
11. Press Load key to load paper (resets top-of-form).
12. Press the On/Off Line key to return to operation.
Press ‘Profile’
To Save Settings
NOTE
To maintain correct top-of-form alignment
when a profile change is made, the paper
should be parked (if not already parked) and
reloaded so that the printer can reset the top-
of-form for the new profile.