AMT Datasouth 400 Printer User Manual


 
User's Guide 16
Connecting the Power Cord
1. Make sure that the source voltage matches the input voltage of the power adapter.
Caution: Incorrect source voltage could cause damage to the printer and/or the
power adapter.
2. Ensure the printer power switch is Off, “O”.
3. Connect the power plug to the Power Jack on the back of the printer. Avoid touching
the parallel connector.
4. Connect AC power plug to a suitable AC source.
5. Connect either a Centronics Parallel or RS-232 Cable.
Figure 6 – Power Connection