Filter
Top Products
Operator Panel Reference
45
Default Parameter Values
This section lists the default parameter values. The Operator may restore these values
using the ENTER to recall defaults feature in the System Parameters menu.
Print Parameters
Print Speed: 4505/4505+ – 100%, 4510 – 60%
Print Darkness: 4505/4505+ – 80%, 4510 – 90%
Gap Sense: 50%
Bar Sense: 50%
Ribbon Sense: 50%
Presentation Distance: 0.45 inches
Feed Forward Distance: 0.00 inches
Print Test Label: 1
SCM Protected: Yes
Label Parameters
Media Type: Thermal Transfer
Label Width: 4.0 inches
Label Length: 4.0 inches
Label Gap: 0.11 inches
X Offset: 0.00 inches
Y Offset: 0.00 inches
I/O Configuration
Baud Rate: 9600
Flow Control: Hardware
RTS Polarity: Online = High
DTR Polarity: Ready = High
Parity: None
Data Bits: 8
Stop Bits: 1
System Parameters
Units: Inches
Media Alignment: Automatic
Hex Dump Mode: OFF