Filter
Top Products
Troubleshooting Guide
52
The printer has detected an abnormally high temperature on the printhead. The
following conditions have caused this problem.
1. If the printer has been printing labels continuously, allow the printer to
cool for a few minutes and press the
ENTER
PRINT
key to continue printing. If the
error reoccurs regularly improve the ventilation around the printer or
reduce the temperature around the printer.
2. The printhead is defective. Contact qualified service personnel.
WARNING: The printhead bracket and printhead will be very HOT
when the printhead has overheated.
Cycle the power and try operating the printer again. If the message reoccurs,
contact qualified service personnel.
Cycle the power and try operating the printer again. If the message reoccurs,
contact qualified service personnel
Head Overheat...
PRINT or CANCEL?
HALT...
CW1 BIOS TRAP!
System Halted!
!