AMT Datasouth 7200 Printer User Manual


 
Operation Manual
iii
7200
INTRODUCTION
Safety Considerations
READ THIS PAGE BEFORE INSTALLING OR USING THIS PRODUCT!
n Do not remove the cover or attempt any repairs on this product. There is risk
of electric shock.
n Do not place heavy materials on the power cable. Do not bend or twist the power cable.
The cable may get damaged, causing fire or electric shock.
n Do not use damaged cables or broken connector or power plugs. There is risk
of fire or electric shock.
n Use only power voltages specified for this product. Improper voltages create a risk of
fire or electric shock.
n Securely plug the power cable into a power receptacle. Metal objects touching the
power plug may cause fire, electric shock, or equipment malfunction.
n Hold the plug when unplugging the power cable. Do not pull on the power cable itself,
or the cable may become damaged and cause fire or electric shock.
n Be careful not to drop anything into any opening of the product. Never push anything
into the openings. There is risk of fire or electric shock.
n In the event of any abnormality (such as smoke or odors), unplug the power
cable immediately. There is risk of fire or electric shock.
n Do not install the product where water splashes are likely or in areas of high humidity.
There is risk of fire or electric shock.
n Do not place drink or liquid containers or small metal objects on the product. These
items may cause fire or electric shock if they spill or fall inside. Immediately unplug
the power cable if liquids or metal objects are spilled on the product.
n Do not use isopropyl alcohol around open flames or heat sources. Alcohol is highly
flammable and creates a risk of fire or explosion.
n Be careful when opening or closing covers. Do not take your hands off covers when opening
or closing them. Falling covers may cause injury.
n Be careful when opening, closing, or moving covers. Take care not to hit your face, head, or
hands with the open cover. You may be injured.
n Do not block the air ventilation holes of the product. Blocking the vents accumulates heat
inside the cabinet and can lead to product failure, heat, or fire damage.
n Do not install the product on an unstable or inclined surface. The product may fall and cause
damage or injury.
WARNING
CAUTION