Filter
Top Products
User's Guide
5-2 Cleaning and Maintenance
WINDOW
SUPPORT
TAB
CLIP
MOUNTING
TABS
Removing and Installing the Top Cover
Maintenance and troubleshooting proce-
dures require you to remove the top cover
to access internal printer components.
To remove the top cover, simply lift up the
front edge, as shown in figure 5-1.
To re-install the top cover, perform the
following procedure:
1. Position the platen window between
the back edge of the top cover and the
window support tabs, as shown in
figure 5-2.
2. Press down on the top cover until the
clips snap onto the mounting tabs.
3. Lower the top cover back into place.
Figure 5-1. Removing the Top Cover
Figure 5-2. Aligning the Platen Window
and Top Cover
CLIPS
User's Guide
5-2 Cleaning and Maintenance
WINDOW
SUPPORT
TAB
CLIP
MOUNTING
TABS
Removing and Installing the Top Cover
Maintenance and troubleshooting proce-
dures require you to remove the top cover
to access internal printer components.
To remove the top cover, simply lift up the
front edge, as shown in figure 5-1.
To re-install the top cover, perform the
following procedure:
1. Position the platen window between
the back edge of the top cover and the
window support tabs, as shown in
figure 5-2.
2. Press down on the top cover until the
clips snap onto the mounting tabs.
3. Lower the top cover back into place.
Figure 5-1. Removing the Top Cover
Figure 5-2. Aligning the Platen Window
and Top Cover
CLIPS