Filter
Top Products
User's Guide
Solving Problems 6-5
Correcting programming
errors––continued
This error message appears when your computer tries to select a font
that is not in the installed FLASH memory. When this message displays,
the printer beeps and printing continues.
Corrective actions: Press the Ready button to stop the printing in prog-
ress and then the Clear button to clear the data input buffer. Perform
one of the following actions:
99
99
9 If you do not have an the missing font, you must change the print job
to request an available font. To determine these fonts, print a Printer
Status Report or just press the Font button on the control panel.
After the change, restart the print job from the beginning.
FONT UNAVAILABLE
Understanding Messages
These messages appear to notify you of special printer conditions.
This message appears after a paper park operation to remind you to
move the tractor select indicator if you are going to load a single sheet
into the printer. Moving this lever disengages the built-in forms tractors
and enables single-sheet mode. If you forget to move this lever, a paper
jam can result since both the single sheet and the pin-feed paper will feed
into the printer at the same time.
Corrective actions: If you are not going to load a single sheet, just
ignore the message. If you are going to load a single sheet, move the
tractor select indicator towards the back of the printer and press the
Ready button.
When you select a printer test on the Setup menu, this message appears to
notify you that the printer is executing the test.
Corrective action: None.
CHECK TRACTR LVR
TEST IN PROGRESS
User's Guide
Solving Problems 6-5
Correcting programming
errors––continued
This error message appears when your computer tries to select a font
that is not in the installed FLASH memory. When this message displays,
the printer beeps and printing continues.
Corrective actions: Press the Ready button to stop the printing in prog-
ress and then the Clear button to clear the data input buffer. Perform
one of the following actions:
99
99
9 If you do not have an the missing font, you must change the print job
to request an available font. To determine these fonts, print a Printer
Status Report or just press the Font button on the control panel.
After the change, restart the print job from the beginning.
FONT UNAVAILABLE
Understanding Messages
These messages appear to notify you of special printer conditions.
This message appears after a paper park operation to remind you to
move the tractor select indicator if you are going to load a single sheet
into the printer. Moving this lever disengages the built-in forms tractors
and enables single-sheet mode. If you forget to move this lever, a paper
jam can result since both the single sheet and the pin-feed paper will feed
into the printer at the same time.
Corrective actions: If you are not going to load a single sheet, just
ignore the message. If you are going to load a single sheet, move the
tractor select indicator towards the back of the printer and press the
Ready button.
When you select a printer test on the Setup menu, this message appears to
notify you that the printer is executing the test.
Corrective action: None.
CHECK TRACTR LVR
TEST IN PROGRESS