AMT Datasouth AMTACCEL-5350 Printer User Manual

Open as PDF

of 255

User's Guide

D-38 Code Sets

Table D-6. Epson and IBM Escape Sequences––continued

Function ASCII Hexadecimal Decimal Description

Text Functions––continued

Download font coding ........ ESC ESC D 1B 1B 44 27 27 68 This sequence downloads a font to the printer. Variable

a1 a2 n1 n2 a1 a2 n1 n2 a1 a2 n1 n2 a1 is the number assigned to the font. The Set Font

coding coding coding escape sequence uses this number to identify and select

the font. Normally, the first downloaded font is assigned

255 (FF hex), the second font downloaded is assigned

254 (FE hex), and so on. Variable a2 must always be 00

hex. Variable n2 and n1 are a 16-bit number that

specifies the number of bytes in the font coding. Variable

n2 is the high-order byte; n1 is the low-order byte. The

font coding must conform to a prescribed binary coding

format.

Note: For more detailed information on this escape se-

quence, refer to AMT Technical Notes––Downloading

Fonts, available separately from AMT.

Set language ....................... ESC ESC G n 1B 1B 47 n 27 27 71 n These sequences set a language for the printer to use

English, US .................... ESC ESC G NUL 1B 1B 47 00 27 27 71 0 while printing text. This setting causes the printer

English, US (alternate) ... ESC R NUL 1B 52 00 27 82 0 to replace some standard ASCII printable characters

French ............................ ESC ESC G SOH 1B 1B 47 01 27 27 71 1 with alternate characters that are used in a specific lan-

French (alternate) ........... ESC R SOH 1B 52 01 27 82 1 guage. The character replacements are shown in the Con-

German ........................... ESC ESC G STX 1B 1B 47 02 27 27 71 2 trol Panel section of this guide, under the Set Language

German (alternate) ......... ESC R STX 1B 52 02 27 82 2 heading.

English, UK .................... ESC ESC G ETX 1B 1B 47 03 27 27 71 3

English, UK (alternate) ... ESC R ETX 1B 52 03 27 82 3 Note: These sequences apply only to fonts with inter-

Danish I .......................... ESC ESC G EOT 1B 1B 47 04 27 27 71 4 national characters. Also, the ESC R n sequence is not

Danish I (alternate) ......... ESC R EOT 1B 52 04 27 82 4 supported when the IBM XL24 emulation is active.

Swedish .......................... ESC ESC G ENQ 1B 1B 47 05 27 27 71 5

Swedish (alternate)......... ESC R ENQ 1B 52 05 27 82 5

Italian ............................. ESC ESC G ACK 1B 1B 47 06 27 27 71 6

Italian (alternate) ............ ESC R ACK 1B 52 06 27 82 6

Spanish I ........................ ESC ESC G BEL 1B 1B 47 07 27 27 71 7

Spanish I (alternate) ....... ESC R BEL 1B 52 07 27 82 7

Japanese ......................... ESC ESC G BS 1B 1B 47 08 27 27 71 8

Japanese (alternate) ........ ESC R BS 1B 52 08 27 82 8

Norwegian ...................... ESC ESC G HT 1B 1B 47 09 27 27 71 9

Norwegian (alternate) ..... ESC R HT 1B 52 09 27 82 9

Danish II ........................ ESC ESC G LF 1B 1B 47 0A 27 27 71 10

Danish II (alternate) ....... ESC R LF 1B 52 0A 27 82 10

Spanish II ....................... ESC ESC G VT 1B 1B 47 0B 27 27 71 11

Spanish II (alternate) ...... ESC R VT 1B 52 0B 27 82 11

Portuguese ...................... ESC ESC G FF 1B 1B 47 0C 27 27 71 12

Portuguese (alternate)..... ESC R FF 1B 52 0C 27 82 12

Print character string ....... ESC \ n1 n2 1B 5C n1 n2 27 92 n1 n2 This sequence prints a character string beginning at the

list list list current print position. Any printable character can be

included in the series, even those assigned control codes.

The values of n1 and n2 define the number of characters

to print. This number equals the number of character

codes in list. The printer interprets n1 and n2 as follows:

Number of characters = (256 x n2) + n1