Filter
Top Products
Quick Start Guide
UDM-0102
Endeleo Multi-Format Distribution Mini-Hub
Overview
The UDM-0102 Endeleo Multi-format Distribution Mini-Hub (FG-UDM-0102) is
designed for small installations with long video/audio cable runs (FIG. 1).
Compatibility
The UDM-0102 is compatible for use with the UDM-RX02 (FG-UDM-RX02) receiver.
Product Specifications
Audio & Video Formats/Resolutions/Distance
A/V Source Input Connectors
There are 2 sets of input connectors to the rear panel of the UDM-0102, labelled A and
B (see FIG. 1) that allow the UDM-0102 to connect to A/V source devices.
Connecting a VGA Video Input
1. Connect one end of a VGA cable to the source device’s VGA output port.
2. Attach the other end of the cable to the appropriate VIDEO IN connection
(A or B) on the UDM. For example, connect to the Video In connection on Input
A of the Hub.
3. Connect any audio to the analog (RCA) audio connectors or digital (SPDIF)
connector.
Note: Ensure Input A is configured as a “VGA Input” and named appropriately within
the “Inputs” section of the Configuration software. Also ensure the correct Audio Type
(Analog L/R or S/PDIF) is selected for the relevant input.
Connecting a Composite Video Input
1. Connect the UDM-HD15RCA3F Breakout Cable (FG-HD15RCA3F, not
included) to the source device’s Composite output ports:
•A1 = red RCA
•A2 = green RCA
•A3 = blue RCA
2. Attach the other end of the cable to the appropriate VIDEO IN connection
(A or B) on the UDM.
3. Connect any audio to the analog (RCA) audio connectors or digital (SPDIF)
connector.
Connecting a Component Video Input
1. Connect the UDM-HD15RCA3F Breakout Cable (FG-HD15RCA3F, not
included) to the video source device’s Component video output connectors
(Red, Green and Blue).
2. Attach the other end of the cable to the appropriate VIDEO IN connection
(A or B) on the UDM.
3. Connect any audio to the analog (RCA) audio connectors or digital (SPDIF)
connector.
FIG. 1
UDM-0102 Hub - Front and Rear panel components
UDM-0102 Specifications
Power Requirements: 24VDC @ .75A
Front Panel Components
Ethernet (RJ-45) port: Provides 10 BaseT network connectivity
Serial (RJ-12) port
(labelled “10101”):
Enables an administrator to control the various functions
to the UDM-0102 from a command line prompt and
terminal connection. Requires a DB9-to-RJ12 adapter
cable (FG-RS01) to connect to a PC.
LEDs: The front LEDs are grouped by control type and are
labeled according to their corresponding port (connector)
numbers on the rear of the unit.
• Power - device is receiving power
• A - Source A is currently selected
• B - Source B is currently selected
• Status - changes from red to green when it receives a
valid UDP command, and returns to red after 30
seconds if it has not received anything.
SELECT (A/B)
Pushbutton:
Pushbutton switches between Source A / Source B.
PRESETS (1/2)
Pushbuttons:
Two pushbuttons execute user-defined presets.
UDM (RJ-45) port: Provides audio/video transport as well as control via Cat5,
Cat5e or Cat6 to a UDM-RX02 Receiver.
Rear Panel Connectors:
Source Inputs (A, B): Two sets of input connectors for A/V source devices
(labelled A and B):
• VIDEO IN: HD-15 input connector (female) - supports
VGA, Component, S-Video and Composite formats.
• Analog Audio: Left (white) and Right (red) stereo RCA
input connectors (female).
• Digital Audio: SPDIF (female) input connector.
IRTX Ports: Two 3.5mm stereo IR Transmitter output ports allow up to
two IR-controlled devices (such as a DVD or VCR player)
to be controlled via optional wired IR emitters.
IRRX Port: 3.5mm stereo input port, allows connecting an IR receiver
to allow learning IR commands.
Power connector
IRRX port
IRTX ports
HD15 female connector (A)
HD15 female connector (B)
SPDIF female
Digital Audio
connector (B)
SPDIF female
Digital Audio
connector (A)
RCA Audio
Left and Right (A)
RCA Audio
Left and Right (B)
RJ-45 port for connection
to an UDM-RX01/02 Receiver
ETHERNET port (RJ-45)
Serial port (RJ-12)
Power LED
Status LED
Active input (A/B) LED
Select
button
Preset buttons (1/2)
Source
UDM-0102 Specifications (Cont.)
Power Socket: 2.1mm barrel-style DC power socket (female)
Operating Environment: • 35°F - 95°F (5°C - 35°C)
• Max. relative humidity - 85% (non-condensing)
Dimensions (HWD):
1.61" x 8.63" x 3.66" (40.89 mm x 219.08 mm x 93.04 mm)
Weight:
1.60 lb. (730 g)
Certifications: • CE
• FCC part 15 Class A
Included Accessories: Power Supply, 24VDC, 750 mA with cable (FG-UDM-PS)
Other AMX Equipment: • HD15 to S-Video Cable (FG-UDM-SVID01)
• HD15 to 3x RCA Breakout Cable (FG-HD15RCA3F)
• RS232 DB9/RJ12 Connection Cable (FG-RS01)
• UDM-RX02 Multi-Format Receiver (FG-UDM-RX02)
• UDM-RC10 Multi-Format IR Engineering Remote
Control (FG-UDM-RC10)
• IR01 IR Emitter Module (FG-IR01)
• IR03 External IR Receiver Module (FG-IR03)
Audio & Video Formats/Resolutions/Distance
Class Format Name Distance (m) Distance (ft.)
Composite 720x480 NTSC 700 2300
720x756 PAL 700 2300
Component 720x480 480p 700 2300
720x756 576p 700 2300
1280x720 720p 200 650
1920x1080 1080i 150 500
1920x1080 1080p 120 400
VGA 640x480 VGA 200 650
800x600 SVGA 200 650
1024x768 XGA 200 650
1280x1024 SXGA 150 500
1600x1200 UXGA 120 400