Filter
Top Products
MasterSwitch Power Distribution Unit User’s Guide 5
MasterSwitch
Power Distribution Unit
Managing the MasterSwitch
PDU
Management Interfaces
Management
Options
After you configure a MasterSwitch
PDU
with the proper network
settings, you can manage the unit remotely through its Web, Telnet
Control Console,
SNMP,
and WAP interfaces.
You can also use the Control Console to manage a MasterSwitch
PDU
locally through a serial connection.
Only one user at a time can access a MasterSwitch
PDU
. Serial
interface users (using a terminal emulator) have precedence over Telnet
users, and Telnet users have precedence over Web and WAP users.
Web interface
To access and log on to the Web interface of the MasterSwitch
PDU:
1. In the
URL
Location field of the Web browser, do one of the
following:
• If the Web port of the MasterSwitch
PDU
is set to the default
value of 80, enter http:// followed by the unit’s
IP
address.
The following example shows a typical
IP
address:
http://170.241.17.51
• If the Web port of the MasterSwitch
PDU
is set to a value other
than the default of
80
, enter the System
IP
address (the
IP
address of the unit) followed by a colon and the configured Web
port value (8000 in the following example).
http://170.241.17.51:8000
• If there is a
DNS
server entry for the MasterSwitch
PDU
, you
can choose to enter the
DNS
name to access the unit.
Continued on next page