Filter
Top Products
MasterSwitch Power Distribution Unit User’s Guide 25
MasterSwitch
Power Distribution Unit
Configuring and Using E-mail Notification
Configuring E-mail Recipients
Menu options
To identify up to four e-mail recipients, use one of the following:
• The
Recipients
option of the Web interface’s
Events
menu
• The
E-mail
option of the Control Console’s
Network
Menu
Settings
Configuring the
local SMTP server
When you select the
Local SMTP Server
option for the
Send via
setting, you must do one of the following:
• Make sure that forwarding is enabled at that server so that the
server can route e-mail to external SMTP servers.
Note: Always see your SMTP-server administrator before
changing the configuration of your SMTP server.
• Set up a special e-mail account for the Management Card.
This account then forwards the E-mail to an external e-mail
account.
Testing E-mail
In the Web interface, use the
E-mail Test
option to send a test e-mail
message to a configured recipient.
Setting Description
To
Address
Defines the user and domain names of the recipient.
To use e-mail for paging, use the e-mail address for the recipient’s
pager gateway account (for example,
myacct100@skytel.com
). The
pager gateway generates the page.
Note: The recipient’s pager must be able to use text-based
messaging.
Send via
Lets you choose one of the following methods for routing e-mail:
• Send e-mail through the Management Card’s SMTP server.
Selecting
Local SMTP Server
, which is the recommended option,
ensures that the e-mail is sent before the unit’s 20-second time-out,
and, if necessary, is retried several times.
• Send e-mail directly to the recipient’s remote SMTP server. If you
select the
Recipient’s SMTP Server
option, and the remote SMTP
server is busy, the time-out may prevent some e-mail from being
sent, With this option, the management card tries to send the e-mail
only once.
E-mail
Generation
Enables (by default) or disables sending e-mail to the defined
recipient.