Filter
Top Products
MasterSwitch Power Distribution Unit User’s Guide 30
Event-Related Menus and Options
Recipients Option
Trap receivers
You can define up to four
NMS
s to be used as trap receivers when an
event occurs that has
SNMP
traps enabled.
In the Web interface, use the
Trap Receiver settings, available through
the
Recipients option of the Events menu.
In the control console, use the
SNMP option of the Network menu.
Continued on next page
Item Definition
Community Name
The password (
15
characters or less) used when traps are
sent to the NMS
identified by the
Receiver NMS IP
setting.
Receiver NMS IP
The
IP
address of the
NMS
to which traps are sent. If this
setting is
0.0.0.0
(the default), no traps are sent to any
NMS.
Trap Generation
Enables (by default) or disables the sending of any traps to
the
NMS
identified by the
Receiver NMS IP
setting.
Authentication
Traps
Enables or disables the sending of authentication traps to the
NMS
identified by the
Receiver NMS IP
setting
.