Filter
Top Products
From the OSD menu.
1. From the main OSD Window, press the Control key twice or type
Alt-M to access the Command Menu.
2. Select ‘‘Turn scanning ON’’ or ‘‘Turn scanning OFF’’ from the
menu. This is a toggle option - only one scanning option will show
on the menu at any one time.
3. Press Enter.
With the Scan Button (non-secure mode only)
1. You may initiate scanning by pressing and holding the Scan push-
button until the SCAN LED lights up.
2. Scanning may be halted if a channel is selected or if the Scan push-
button is pressed again.
1. From the main OSD Window, press the Control key twice or type
Alt-M to access the Command Menu.
2. Choose ‘‘Scanning order’’ from the menu.
3. Select either ‘‘Sequential order’’ or ‘‘Alphanumeric order’’.
4. Press Enter.
5.2 Setting the Scanning Order
5.3 Turning Scanning On and Off
23