Filter
Top Products
Connecting to a network
Your computer has built-in AppleTalk networking software. This
software directly supports the LocalTalk cables you need to
connect your computer to the network. (If your computer has the
appropriate port or expansion card, AppleTalk also supports
Ethernet and TokenRing cables.)
1. Choose Shut Down from the Special menu.
2. Connect the LocalTalk cable to the printer port ([) on
the back of your computer.
If your computer has a combined printer/modem port,
connect the LocalTalk cable to that port.
See your network administrator or the documentation that
came with your cables if you need more information.
Turning on AppleTalk
The first time you turn on your computer after you have
connected it to a network, you need to make sure that
AppleTalk is turned on.
1. Choose Chooser from the Apple (K) menu.
2. Click the Active button to turn on AppleTalk.
continues .
Icon
Printer port
Chapter 12: Using Your Computer on a Network 185
AppleTalk must be
active before you can
use a network.